Modern cars are designed with safety features to limit the rate at which accidents occur on the road. The service-side detection system was designed to prevent drivers from running into or crashing into another vehicle coming behind.
The system will however detect whether someone is close by or not. If a pedestrian, car, etc., is close by, the system will alert you either by a warning light on the side mirror or with a beeping sound.
The SSDS was not designed to last forever without giving issues, when the issues arise, they will be fixed and afterward, a reset needs to be done. Therefore, how do you reset the service side detection system.
How to Reset Service Side Detection System
To reset the service side detection system, you need to use an OBD II scanner tool or check for recalls.
- Use an OBD II Scanner Tool: With an OBD scanner tool, you can be able to reset the service side detection system. So once the reset side detection system light appears on the dashboard, use the tool to clear the error code sent to your car’s computer. This should perform the reset and clear the warning light on your dashboard.
- Check for Recalls: Check if your car’s manufacturer is calling for recalls for cars with a service side detection system, check if your car is among the cars listed for recalls. If it does, it’s best to take the car back to them to have it fixed. This should save you some money. If you’re not sure about the recalls, please check your car’s manufacturer’s website.
These are the best ways to reset the service side detection system.
What to Do Before Resetting the Service Side Detection System
The first step in resetting the service side detection system would be fixing all the faults the system has.
It would be a complete waste of time resetting the system if it has internal problems that need to be fixed. You need to first find the cause of the problem, fix it first before performing the reset.
Cause of Service Side Detection System Problems
The causes of the service-side detection system problems are:
1. Clogged Sensors
The sensor that controls the service side detection system could be clogged by dust and debris preventing the system from responding the way it should. You can fix this by removing the debris from the sensor.
If this debris is not removed and the sensor cleaned, the system will continue to malfunction until the needful is done.
2. Failed Parts
If after removing the sensor and reinstalling it the system continues to perform poorly, it could be that a part has gone bad or something else is wrong with the system.
In this case, you should use an OBD II scanner to scan to know what it is. If the sensor has gone bad, consider replacing it.
3. Software Updates
Sometimes, the service side detection system problems could be a software update issue. If the system requires an update, the update should be made immediately to enable the technology to communicate better.
However, if you are not very familiar with how the update is made, it’s advisable to take the vehicle to the dealer to have it done for you. It’s better that way.
4. Water Damage
If water finds itself in the mirror, it may damage the electrical components inside the mirror which can prevent the system from responding optimally.
The mirror is however sealed so that water cannot find itself inside it, if the reverse becomes the case, have the damaged parts replaced immediately.
If there are no damaged parts, ensure that the water is dried before installing the mirror to avoid further issues.
5. Damaged Mirror
If the mirror is damaged or broken, it can affect the service side detection system.
As reiterated earlier, the systems technology is designed that both mirrors has to communicate for the system to work appropriately. If one or both side mirror is damaged or broken, it could affect the functionality of the system.
Therefore, have the mirror replaced before performing any reset. While replacing the mirror, ensure to use the right mirror for the car otherwise, the system may not work.
Be that as it may, if while checking for possible issues, you encounter any, have them fixed first before performing the reset.
While working on the service side detection system, it is important you disconnect the battery before starting the work. The reason for this is that the side detection system is entirely comprised of electrical components, so it’s essential you disconnect your battery before performing any fix.
Signs of a Bad Service Side Detection System
The signs of a bad service side detection system are:
- Warning Light on the Dashboard: Once the service side detection system goes bad, the warning light will appear on your dashboard telling you to reset the system to enable the system functions appropriately.
- Indicator Light Won’t Turn Off: The indicator light on the mirror which indicates that something or someone is close by is designed to come and go off when someone/something is in the blind spot and when the thing is no longer there. If this indicator light fails to go off and continues to be on when no car is in the blind spot, then the system could be having problems.
- Beeping Sound: In some vehicles, you may start hearing a continuous beeping sound that won’t go away until you perform a reset on the system.
Conclusion
The reset service side detection system warning light will appear on your dashboard once your car’s ECU or the technology detects an issue with the system. When this happens, it’s best to fix whatever issue that may have caused the warning light to come on in the first place before performing a reset, otherwise, the light will come back on after the reset is done.